Starting A Web Browser Session - GE MDS iNET Series Reference Manual

The unit responds with a Starting Information Screen (see Figure 2-6). From here, you can review basic
information about the unit or press
NOTE:
Passwords are case sensitive. Do not use punctuation mark characters. You may use up to eight
alpha-numeric characters.

Starting a Web Browser Session

NOTE:
Web access requires that you know the IP address of the unit you are connecting to. If you do not
know the address, start a Local Console session (see Starting a Local Console Session (Recom-
mended for first-time log-in) on Page 17) and access the Starting Information Screen. The IP
address is displayed on this screen.
1. Connect a PC to the unit's
Ethernet crossover cable; if connecting via a network, use a straight-through cable. The
lights to indicate an active connection.
2. Launch a Web-browser session on your computer (i.e., Internet Explorer, Firefox, etc.).
3. Type in the unit's IP address and press
4. A log-in screen is displayed (Figure 2-7) where you enter a user name and password to access the unit's
menu system. (Default username is
is ).
admin
Figure 2-7. Log-in Screen—Web Browser Example
NOTE:
Passwords are case sensitive. Do not use punctuation mark characters. You may use up to eight
alpha-numeric characters.
5. Click . The unit responds with a startup menu screen similar to that shown in Figure 2-8. From here,
OK
you can review basic information about the unit or click on one of the menu items at the left side of the
screen.
20
to proceed to the Main Menu.
G
port, either directly or via a network. If connecting directly, use an
LAN
.
ENTER
or
iNET iNET-II
iNET
MDS iNET Series Reference Manual
, in accordance with radio model; Default Password
Invisible place holder
LAN LED
05-2806A01, Rev. L