Remote Listing Menu (Access Points Only) - GE MDS iNET Series Reference Manual

Figure 2-68. Wireless Network Status Screen with Mobility Enabled
When mobility is enabled, these additional read-only parameters will be available:
•
Connection Detail
a limited time after
•
RSSI assoc threshold
•
RSSI assoc threshold now
•
RSSI assoc threshold reset to
listed is added back into the scan list.
• —Current average RSSI value in dBm.
RSSI
• —Current average Signal to Noise Ratio (SNR) value in dB.
SNR
2.8.5 Remote Listing Menu
• —Hardware address of the Remote transceiver.
MAC Address
• —IP Address of the Remote transceiver.
IP Address
78
—This value is only populated when the Connection Status is in
.
Association
is when scanning begins after falling below the disassociation threshold.
is when an association threshold back-off step is applied.
is when the blacklist timer expires and the AP that has been black-
(Access Points Only)
Figure 2-69. Remote Listing Menu
(List of transceivers associated with this AP)
MDS iNET Series Reference Manual
(Remotes Only)
and for
Scanning
05-2806A01, Rev. L