Accessories - GE MDS iNET Series Reference Manual

Security Vulnerability
Unprotected access to configuration via
SNMPv1
Intrusion detection

1.6 Accessories

Table 1-4 lists common accessories and spare items for the transceiver. GE MDS also offers an Accessories
Selection Guide listing an array of additional items that may be used with the product. Contact your factory
representative or visit
www.gemds.com
Accessory
AC Power
Adapter Kit
Omni-
Directional
Antenna
Yagi Antenna
(Directional)
Surge
Protectors
Cable
AVA5-50A
Cable
LDF4-50A
Cable LMR-400
Cable RJ45
CAT5
Connector Kits
(up to 1 GHz)
TNC Male-to-N
Female Adapter
12
Table 1-3. Security Risk Management
to obtain a copy of the guide.
Table 1-4. Accessories
Description
A small power supply module designed for
continuous service. UL approved. Input:
120/220; Output: 13.8 Vdc @ 2.5 A
Rugged antennas well suited for use at Access
Point installations.
Rugged antennas well suited for use at Remote
installations.
125-1000MHz NF-NF Flange
125-1000MHz NF-NF Bulkhead
7/8-in. Foam Per Foot
1/2-in. Foam Per Foot
Standard Outdoor Cable Per Foot
Crossover 6-ft.
Straight 6-ft.
LDF4 TNC-M with Bulkhead Mount
LMR400 TNC-M with Bulkhead Mount
LMR400 TNC-M with Flange Mount
One-piece RF adaptor plug.
MDS iNET Series Reference Manual
GE MDS Cyber Security Solution
• Implement SNMPv3 secure
operation
• Provides early warning via SNMP
through critical event reports
(unauthorized, logging attempts,
etc.)
• Unauthorized AP MAC address
detected at Remote
• Unauthorized Remote MAC address
detected at AP
• Login attempt limit exceeded
(Accessed via: Telnet, HTTP, or
local)
• Successful login/logout
(Accessed via: Telnet, HTTP, or
local)
Part No.
01-3682A02
97-3194A17
97-3194A14
97-1680A01
97-1680A05
97-1677A174
97-1677A103
97-3675A10
97-1870A21
97-1870A20
97-1677A171
97-3675A86
97-3675A76
97-1677A161
05-2806A01, Rev. L