Turning The Housing - Beko METPOINT FLM SF53 Installation And Operation Instruction Manual

Installation and operating manual

3.1.3. Turning the housing

If the direction of flow changes, the housing can be turned by loosening 4 grub screws with 0.059 in hexagon socket to the desired
position. Then tighten the grub screws again by hand.
NOTICE Risk of damage to device
•
•
18
Ensure that the connecting pipes are correctly mounted and that the gaskets are installed properly.
Then align the sensor in the direction of flow using the alignment aid.
EN
METPOINT SF53
®