Transport And Storage - Beko METPOINT FLM SF53 Installation And Operation Instruction Manual

Installation and operating manual

1.4. Transport and storage

Despite our best efforts regarding packaging, etc., the device might be damaged during transport. Upon receipt, please remove all
packaging material and inspect the product for visible damage. If you detect such damage, immediately notify the carrier company
and BEKO TECHNOLOGIES GMBH or one of its agents.
CAUTION Damage caused during transport or storage
Incorrect transport or storage, or the use of unsuitable lifting equipment might cause damage to the
device.
•
•
•
•
NOTICE Recycling of packaging material
•
6
The device must only be transported and stored by authorized and suitably trained technical
personnel.
If you detect any damage, do not start the device.
Adhere to the permissible storage and transport temperatures (see technical data).
Protect the device against direct sunlight and heat radiation.
The packaging material is recyclable. Dispose of the packaging material according to the applicable
statutory regulations of the destination country.
The device must be stored in the original
packaging. Seal the packaging and store it in a
dry and frost-free room. Ensure that the storage
temperature does not exceed the limits specified
on the type plate.
Even when packaged, take suitable measures to
protect the device against the elements.
While in storage, secure the device so that it
cannot topple over or fall, and protect it against
vibration.
EN
METPOINT SF53
®