Transport And Storage; Unpacking - Beko METPOINT OCV Installation And Operation Manual

8

Transport and storage

•
During the transport, the permissible temperature of 50°C (storage temperature) must not be exceeded.
•
Transport should only take place in the original packaging.
•
Protect the device against falls or excessive vibrations.
9

Unpacking

After having checked the soundness of the outer packaging, set up and unpack the device in close proximity to the
selected places of installation of the sensor and the evaluation unit.
For the connection to the sensor unit, do not touch the probe without wearing oil- and grease-free gloves
(textile gloves are recommended). A fingermark on the probe or in the measuring zone can affect the
measuring results or lead to false measurements.
Handle the device with due care.
Strong shocks cause irreparable damage.
When not directly employing the METPOINT
The installation and operating instructions should be kept with the device!
The packaging consists of recycled material.
Dispose of each individual material separately in accordance with the local provisions.
METPOINT ® OCV
Protect the device against atmospheric influences even
when packaged.
The METPOINT
excessive vibrations at the place of storage.
Store the METPOINT
closed, frost-protected room at a maximum temperature of
+50°C and an air humidity of max. 75%.
If the storage period exceeds 12 months, you should contact
the manufacturer.
The installation and operating instructions should be kept
with the device!
®
OCV, keep the device in the original packaging!
Transport and storage
®
OCV must be protected against falls and
®
OCV in the original packaging in a
19