Maintenance And Service; Care; Daily Check - Beko METPOINT OCV Installation And Operation Manual

Maintenance and service

15 Maintenance and service
®
The METPOINT OCV must be serviced and maintained at regular intervals by authorised skilled personnel. Please
have the necessary repair measures only carried out by specialists. Use genuine BEKO spare parts only.

15.1 Care

NOTE!
Aggressive cleaning agents and solvents must not be used!

15.2 Daily check

Please verify the function of the reference gas generation unit once a day. For this purpose, check whether or not the
LED inside the sensor unit flashes (see the area that is marked blue). It may be required to choose an inclined angle of
view.
When the LED flashes, the reference gas generation unit is functional. In the event that the LED light remains constant
or that the LED is switched off, please immediately contact the BEKO service.
In addition, the function of the reference gas generation unit is ensured when the left part of the sensor unit shows an
increased temperature (can be detected by hand).
68 METPOINT ® OCV