11.3 Procedure start measurement
Main menu
Please select the "Measurement" menu item.
Make your choice between "Compressor Oils" or "Other Hydrocarbons".
Click on the corresponding substance in the related select list. The other select list is disabled.
When choosing "Custom Oil", oil with a self-calculated factor can be measured.
When the "ScientificMode" (Settings->ScientificMode) is activated, a corresponding warning is shown.
NOTE!
Please use this mode only after consultation with BEKO. Close measuring gas connection "M". Connect zero
air to "Z". Connect measuring gas to "C".
The max. permissible operating pressure in the scientific mode is 3 bar(g).
METPOINT
®
OCV
Start-up
43