Beko METPOINT FLM SF53 Installation And Operation Instruction Manual page 37

EN
6.8. 4 ... 20 mA
Setup → 4 - 20 mA
Setup → 4 - 20 mA → Channel 1
33425.2 fpm
cfm
33425.2 fpm
METPOINT SF53
®
On this screen, you can adjust the settings for the 4 ... 20 mA analog output.
The following measurements can be configured:
• Flow
0.000 cfm
• Velocity
• Temperature
646.25 cfm
• unused = deactivate channel
646.25 cfm
This screenshot shows the adjustable units for volume flow. Press the "<<" button
to call up the next screen.
The scaling of the 4 ... 20 mA analog output can be set to automatic ("AutoRange
= on") or manual ("AutoRange = off").
With "AutoRange = on", the sensor automatically calculates the valid measuring
0.000 cfm
range and associated reference conditions, based on the set pipe diameter.
646.25 cfm
Select "Scale 4mA" and "Scale 20mA" to manually configure the scaling of the
output (precondition: "AutoRange = off").
646.25 cfm
cfm
Installation and operating manual
cfm
Enter the scale for 4 mA and 20 mA
respectively.
37