(2)
While curving the filter, take the projections (2 locations) at the right side of filter out of
the slots of bezel to detach the filter.
Slot
Slot
6.8.2
Attaching the filter
(1)
Set the filter so that the projections of filter (large) come to the lower right facing to the
bezel.
(2)
Insert the projections into the slots at the right side facing to the bezel.
(3)
Curve the filter and fit the projections into the slots at the left side of bezel.
Slot (small)
Projection (small)
Slot (small)
Projection (small)
6 - 19
Slot and
projection (small)
Slot and
projection (large)
L1E-EA0229