Table of Contents
Advertisement
(19) Click the "Yes" button.
(20) Click the "Yes" button and continue assignment of drive.
(21)Confirm the drive letter is changed from D to F. Close the dialog by clicking
(22) Shut down in accordance with (11)(12).
Procedure to repairing has been completed now. After this, the ultrasound scanner can be
started as usual.
If option software(s) have been installed on the system, install them again referring to the
option's Technical Guide.
When the ultrasound scanner software in HDD is installed, protection is applied to
onerous options.
This protection needs to be released using A-Disk.
release it, refer to Appendix A.
3 - 19
For the method to
L1E-EA0229
Advertisement
Table of Contents
