MAIN UNIT OPERATION
Selection of the Input Signal
These buttons select the equipment connected to the INPUT connectors of this
unit.
INPUT SELECT
ABC
DEF
1
2
JKL
MNO
4
5
STU
7
Select the input equipment by pressing the main unit INPUT buttons 1 through 7.
(Buttons 8, 9, and 0 do not have a function.)
When INPUT 7 (RGB) has been selected, the output from the MONITOR
OUTPUT connector will permit selection of INPUT 1 through 5 and OFF with the
MONITOR button.
When a selection has been made, the information will be displayed on screen for
about 5 seconds.
Selection of the Monitor Output
The selection of the input equipment, which is output from the MONITOR
OUTPUT connectors when INPUT 7 (RGB) has been selected, will be the
selection of the monitor output.
<Remote Control Operation>
MONITOR
Each press of the MONITOR button
the sequence of OFF
INPUT 1
and the signal is output from the MONITOR OUTPUT connectors. Each press of
the
button moves one step in the reverse direction.
<Main Unit Operation>
Main unit operations are the same as the operations of the remote control
MONITOR button
part.
Table of Output to the MONITOR OUTPUT Connector when 7 Is Selected
Input Signal
VIDEO Input
S-VIDEO Input
3
INPUT 1-5*
-
INPUT S1,S2*
1
INPUT 1, 2*
INPUT S1,S2*
1
*
The S-VIDEO jack will be given priority for equipment to which a VIDEO input
signal and an S-VIDEO signal have been connected at the same time.
GHI
3
PQR
6
part advances the selection one step in
INPUT 2
INPUT 3
MONITOR OUTPUT
VIDEO Output
-
INPUT1-5
2
INPUT S1,S2*
1
INPUT S1,S2*
INPUT 4
INPUT 5 ,
S-VIDEO Output
3
INPUT 1-5*
2
INPUT S1,S2
1
INPUT S1,S2
18
INPUT1 S-VIDEO
INPUT1
INPUT3
INPUT5
INPUT7
INPUT2
INPUT4
INPUT6 MONITOR
OUTPUT
2
*
The S-VIDEO input signal of INPUT 1 and 2
will be output from the monitor output VIDEO
connectors.
3
*
The VIDEO input signals of INPUT 1 through
5 will also be output from the S-VIDEO con-
nector of the monitor output.
OUTPUT