Adjustment; Picture Adjustments; Returning The Picture Adjustments To The Initial Setting Values; Blue Output Setting(Blue-Out) - NEC IPS-4000 User Manual

1 2 3 4
1 2 3 4

ADJUSTMENT

1 2 3 4
1 2 3 4
1 2 3 4

Picture Adjustments

COLOR (i.e., saturation of colors), TINT and SHARPNESS (i.e., sharpness of
picture quality), can be adjusted and output.
When the input channel is set to INPUT 6 (COMPONENT), adjustment of TINT
is not permitted. Also note that when the input signal is a black-and-white signal,
only the SHARPNESS adjustment is permitted.
<Main Unit Operation>
Each press of the PICTURE FUNC. button advances the selection one step in the
sequence of COLOR
appear. Bring up the desired adjustment indication on the on-screen display.
PICTURE FUNC. MENU
The or button permits adjustment in 49 steps from -24 to 0 to +24. About 5
seconds after the adjustment, the on-screen display will go off.
Depending on the format of the input signal, adjustment of some functions might
not be possible. The on-screen display will not appear for items that cannot be
adjusted.
•
COLOR (Color Saturation Adjustment)
Pressing the button makes the color thinner, pressing the button makes the
color deeper.
•
TINT (Tint Adjustment)
Pressing the button makes the video more red, pressing the
the video greener.
Press the button on the remote control which you want to adjust. The on-screen
display of the information associated with that button appears. Make the adjust-
ment with the and CURSOR buttons.
•
SHARPNESS (Picture Quality Sharpness Adjustment)
Pressing the button makes the color thinner, pressing the button makes the
color deeper.
•

Returning the Picture Adjustments to the Initial Setting Values

A press of the NORMAL button will return to zero level (initial value) the
adjustments of COLOR, SHARPNESS, and TINT.
•
Blue Output Setting (BLUE-OUT)[For service personnel only]
When set to ON, output will be only from the B (blue) OUTPUT connector.
The BLUE-OUT display is set by selecting TINT and pressing the CTL button and
the MENU button at the same time while the on-screen display is being shown.
Press the button of the CURSOR and select ON. To switch off the function,
press the button and select OFF.
A press of the ENTER button will return to the TINT adjustment screen.
TINT SHARPNESS. The on-screen display will
NORMAL
ENTER
CTL END
button makes
20
PICTURE FUNCTION
COLOR
PICTURE FUNCTION
TINT
PICTURE FUNCTION
SHARPNESS
BLUE OUT ON/ OFF
00
R03
{ 03