System Settings; How To Bring Up The On-Screen Display And Select Items - NEC IPS-4000 User Manual

1 2 3 4
1 2 3 4

SYSTEM SETTINGS

1 2 3 4
1 2 3 4
1 2 3 4
How to Bring Up the On-screen Display and
Select Items
CURSOR
1.
Press the MENU button while holding down the CTL button to display the on-
screen menu of system settings.
2.
Press the or
SYSTEM A Items
SOUND ATT ........... Sound output level adjustment.
TBC ......................... Turning on or off time base corrector.
Y/C DELAY ............. Y/C signal delay adjustment.
MATRIX .................. Setting of the component input signal.
VIDEO FORMAT ..... Selection of the input signal system.
SYSTEM B Items
DISPLAY ................. Switches the on-screen display on and off.
LCD LIGHT ............. Switches the LCD backlight of the main unit on and off.
AUTO POWER ....... This setting automatically starts up the unit when the main
IR RMT-CTL ............ This setting determines whether or not the signal from the
SYNC ...................... This sets the output polarity of the sync signal.
3.
Desired items are selected with the
MENU
CTL ENTER END
CURSOR button and select SYSTEM A or SYSTEM B.
power is switched on.
remote control is received.
and
The currently set scanning system is displayed.
buttons of the cursor.
24
SYSTEM A
SOUND ATT
TBC ON OFF
Y/ C DELAY - 2 - 1
0 +1+2
MATRIX Cr/ Cb
R-Y/ B-Y Pr/ Pb
AUTO NTSC
VIDEO FORMAT
4.43NTSC PAL
SECAM
(Factory Default Settings)
SYSTEM B
DISPLAY ON OFF
LCD LIGHT ON OFF
AUTO POWER ON OFF
IR RMT-CTL ON OFF
- - - +
SYNC H V H V
+ - + +
[ ]
DBL H V H V
(Factory Default Settings)
SYSTEM A
00
SOUND ATT
TBC ON OFF
Y/ C DELAY - 2 - 1
0 +1+2
MATRIX Cr/ Cb
R-Y/ B-Y Pr/ Pb
VIDEO FORMAT AUTO NTSC
4.43NTSC PAL
SECAM
00