4.
The
or
CURSOR button is used to determine the setting of the
contents
5.
Press the ENTER button to exit. In the absence of key input, the on-screen
display will go out in about 5 seconds.
Adjustment of Sound Output Level (SOUND ATT)
This function adjusts the level of the audio signal.
Select SOUND ATT of SYSTEM A, then press the
adjust to the desired level.
The adjustment range is from -48 to 0.
Setting of the Time Base Corrector Function
This function turns on or off the time base corrector.
Select TBC of SYSTEM A, then press the
the desired contents.
ON ................ Time base correction ON
OFF .............. Time base correction OFF
Adjustment of Y/C Signal Delay (Y/C DELAY)
This function adjusts the delay of the Y/C signal.
Select Y/C DELAY of SYSTEM A, then press the
adjust to the desired level.
or
CURSOR button and
(TBC)
or
CURSOR button and select
or
CURSOR button and
25
SYSTEM SETTINGS
SYSTEM A
00
SOUND ATT
TBC
ON
OFF
Y/ C DELAY
- 2 - 1
0
+1+2
MATRIX
Cr/ Cb
R-Y/ B-Y Pr/ Pb
VIDEO FORMAT
AUTO
NTSC
4.43NTSC PAL
SECAM
SYSTEM A
SOUND ATT
00
TBC
ON
OFF
- 2 - 1
Y/ C DELAY
0
+1+2
MATRIX
Cr/ Cb
R-Y/ B-Y Pr/ Pb
VIDEO FORMAT
AUTO
NTSC
4.43NTSC PAL
SECAM
SYSTEM A
SOUND ATT
00
TBC
ON
OFF
- 2 - 1
Y/ C DELAY
0
+1+2
MATRIX
Cr/ Cb
R-Y/ B-Y Pr/ Pb
VIDEO FORMAT
AUTO
NTSC
4.43NTSC PAL
SECAM
SYSTEM A
00
SOUND ATT
TBC
ON
OFF
- 2 - 1 0 +1+2
Y/ C DELAY
Cr/ Cb
MATRIX
R-Y/ B-Y Pr/ Pb
AUTO
NTSC
VIDEO FORMAT
4.43NTSC PAL
SECAM