Splitting The Screen (Split) - NEC IPS-4000 User Manual

<Main Unit Operation>
A press of the MENU button will bring up the on-screen display. Press the MENU
button until NR is displayed. The selection method is the same as with the remote
control.

Splitting the Screen (SPLIT)

This function sets the artificial interlace display to half the screen or the full screen.
This is used to view the effects of the scanning line interpolation.
The unit should normally be used with this setting OFF.
NOTE
The adjustment for motion detection level (MOTION / STILL) is not available.
This function is available only when the output format is DOUBLER. The on-
screen display does not appear except when the output format is DOUBLER.
<Remote Control Operation>
SPLIT
A press of the SPLIT button displays SPLIT directly on screen.
Each press advances the selection one step in the sequence of
OFF HALF ALL.
CURSOR
Press the or CURSOR button and select.
<Main Unit Operation>
A press of the MENU button will bring up the on-screen display. Press the MENU
button until SPLIT is displayed. The selection method is the same as with the
remote control.
R B
23
ADJUSTMENT
MENU
SPLIT OFF HALF ALL