Table of Contents
Advertisement
Options Summary
Enabled -Robot holds BIOS from starting POST, right after power on. This allows BIOS
POST to start with stable power or start after system is physically warmed-up. Note:
Robot does this before 'Sends watch dog'.
Delayed POST
(DXE phase)
Enabled -Robot holds BIOS before POST completion. This allows BIOS POST to start
with stable power or start after system is physically warmed-up. Note: Robot does
this after 'Sends watch dog before BIOS POST'.
3.4.6.1
Device Detecting Configuration
Options Summary
Action
Select action that robot should do.
Soft or hard reset
Select reset type robot should send on each boot.
Chapter 3 – AMI BIOS Setup
Disabled
Enabled
Reset System
Hold System
Soft
Hard
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
53
Advertisement
Table of Contents
