Table of Contents
Advertisement
Options Summary
Enabled -Robot holds BIOS from starting POST, right after power on. This allows BIOS
POST to start with stable power or start after system is physically warmed-up.
Note: Robot does this before 'Sends watch dog'.
Delayed POST
Disabled
(DXE phase)
Enabled
Enabled -Robot holds BIOS before POST completion. This allows BIOS POST to start
with stable power or start after system is physically warmed-up.
Note: Robot does this after 'Sends watch dog before BIOS POST'.
3.4.7.1
Device Detecting Configuration
Options Summary
Action
Reset System
Hold System
Select action that robot should do.
Soft or hard reset Soft
Hard
Select reset type robot should send on each boot.
Chapter 3 – AMI BIOS Setup
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
60
Advertisement
Table of Contents
