Table of Contents
Advertisement
2.5.2
DDR5 SODIMM Installation
For this process you will need a Phillips head screwdriver.
Step 1: Access the DDR5 SODIMM slots by removing the two (2) screws on the panel
marked 'SODIMM/M.2 2280' on the bottom-side of the chassis as shown below.
Step 2: Insert thermal pad followed by DDR5 SODIMM(s).
Step 3: Insert second thermal pad prior to replacing the bottom cover and reaffixing
the two (2) screws removed during step 1.
Chapter 2 – Hardware Information
39
Advertisement
Table of Contents
