ENGINE / COOLING SYSTEM
ENGINE SERVICE
FRONT ENGINE MOUNT ISOLATOR
REPLACEMENT
1. Remove the rear skid plate fasteners
the skid plate from the vehicle.
2. Using a commercially available transmission lift or
pump jack, lift the front engine mount to take the
weight off the isolators.
3. Remove the fasteners
mounts to the frame.
4. Remove the isolator bolt
5. Install new isolator and bolt. Torque fastener to
specification.
6. Lower the lift or jack and align the isolator tang with
the holes in the frame. Install isolator to frame
fasteners. Torque fasteners to specification.
3.46
q
and remove
q
retaining the isolator
w
and remove the isolator.
7. Install
rear
skid
specification.
TORQUE
Engine Mount Isolator Bolts:
40 ft-lbs (54 Nm)
Engine Mount Nuts:
22 ft-lb (30 Nm)
Skid Pan Fasteners:
8 ft-lbs (11 Nm)
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
pan.
Torque
fasteners
© Copyright Polaris Industries Inc.
to