Brake, Steering, And Suspension Diagnostic Procedures - Polaris RZR XP Service Manual

DIAGNOSTIC

BRAKE, STEERING, AND SUSPENSION DIAGNOSTIC PROCEDURES

q
What is the
customers concern
and can the concern
be duplicated at this
time?
w
Are there any
Team-Tips, Recalls,
or Other Bulletins for
concern?
e
Is the EPS
Warning light on?
r
Brake Concern
Inspection
10.44
Yes
• Proceed to step
• Refer to Symptom Checklist. The conditions in which the concern happens
No
may not be present at this time. Get as much information as possible under
which the concern happens.
• Proceed to bulletin for repair procedure. If problem is still present return to
Yes
chart.
No
e
• Proceed to
• Check codes using Digital Wrench. Refer to EPS Troubleshooting (Power
Steering Non-Functional with MIL ON) page 10.48EPS Troubleshooting (Using
Yes
Digital Wrench®) page 10.50
• For Brake concerns continue to
• For Steering concerns continue to
No
• For Suspension concerns continue to
• First perform brake inspection. Refer to Chapter 2, Maintenance — Brake System
• If no concerns are found during inspection and concern is Brake Noise, refer to BRAKE
NOISE TROUBLESHOOTING page 10.46
• If no concerns are found during inspection and concern is Poor Performance, refer to
Poor Brake Performance page 10.47
• If no concerns are found during inspection and concern is Pedal Vibration refer to Pedal
Vibration page 10.47
• If no concerns are found during inspection and concern is Brake Dragging or Caliper
overheating refer to Caliper Overheats (Brakes Drag) page 10.47 or Brakes Lock page
10.47
• Refer to Chapter 8 — Brake System for more information.
w
r
t
y
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.