Removing The Electric Cover - Toro Greensmaster e1021 Diagnostic Manual

1. Control cover

Removing the Electric Cover

The white electric cover must be removed to access some of the connectors on the wire harness, and some
of the machine components.
1. Disconnect the battery. Refer to
2. Remove the 4 fasteners that secure the white electric cover to the machine.
3. Remove the white electric cover from the machine.
1. Electric cover
Figure 8
2. Fasteners (4)
Connecting and Disconnecting the Battery (page
Figure 9
2. Front fasteners (rear fasteners not shown)
17
g364085
14).
g364086