Status Indicators
Home
Settings menus
1 Even when the "5G" icon is shown during standby, the icon may change to "4G" or "LTE" and 4G/LTE communication may be used when
communicating.
2 Appears also when Wi-Fi router is set to Wi-Fi Spot or connected to the Internet using Cradle (sold separately) with the LAN Cable.
Reception level:
: Reception level strong
: Reception level weak
: No signal
: Data roaming
Network operator:
: Connected network operator name
Network:
: 5G network connected
1
: 4G network connected
: LTE network connected
: 3G network connected
Operation mode of Cradle (sold separately):
: When connected to Cradle (sold separately) and AP/Bridge mode is set
Mobile network connection status:
: Connected to mobile network
: Receiving data
: Sending data
: Sending/receiving data
: Mobile network not connected
2
Reception level when Wi-Fi Spot activated:
: Reception level strong
: Reception level weak
Software update:
: When software needs to be updated by a new software release
Data speed restriction (when subscribed as an individual):
: Advance notice of slow-speed communication
: Start of slow-speed communication
: Cancellation of slow-speed communication
Notification received display:
When notifications are received and unread
Wi-Fi
(wireless LAN) band:
®
: Set to 2.4GHz (lower right digit is number of units connected)
: Set to 5GHz (W56) (lower right digit is number of units connected)
: Set to 5GHz (W52) (lower right digit is number of units connected)
: Set to 2.4GHz/5GHz (W56) (lower right digit is number of units connected)
: Set to 2.4GHz/5GHz (W52) (lower right digit is number of units connected)
: Guest SSID is enabled, set to 2.4GHz (lower right digit is number of units connected)
: Guest SSID is enabled, set to 2.4GHz/5GHz (W56) (lower right digit is number of units
connected)
: Guest SSID is enabled, set to 2.4GHz/5GHz (W52) (lower right digit is number of units
connected)
Battery power remaining (icon, %):
: Battery level full
: Battery level low
: Battery level insufficient (charge needed)
: Charging
: Battery level full (when Longlife Charging function is set to "ON")
: When power supply setting is set to "ON"
Shows Home page of the Settings screen.
Click menu items to view settings page.
111