Table of Contents
Advertisement
72
Setting Protected Management Frames
(PMF)
Enable function to protect some Wi-Fi management frames
(PMF). This protection function is enabled only against Wi-Fi
devices that request use of the function.
When the encryption mode is "WPA3-SAE(AES)" or "WPA2-PSK/
WPA3-SAE(AES)," then the settings for this function (Wi-
Fi Protected Management Frames (PMF)) are not shown. This
function (Wi-Fi Protected Management Frames (PMF)) is needed
to operate with WPA3.
You can set SSID (Owner) and SSID (Guest) separately.
Initial setting: ON (Use)
・Wi-Fi devices that do not support PMF may not be able to
connect when this function is ON. If this happens, turn this
function OFF (Do not use), or change the encryption mode to
"WPA2-PSK (AES)" or "WPA/WPA2-PSK (TKIP/AES)." For how
to change the encryption mode, see
*Turning off Wi-Fi Protected Management Frames (PMF)
function is not recommended. You should determine whether
to use it, according to your operating environment.
In Home Screen,
or
Quick Menu screen
Settings)
"Owner SSID
Settings."
Quick Menu
or
Setting
(Detail
Detail Settings screen
Settings)
PMF
(Management Frame(Wi-Fi))
SSID(Owner)
or
LAN
(LAN
Advertisement
Table of Contents
