NEC A201NE User Manual page 156

154
IPv6 Packet Filter Settings
Set an IP packet filter. Restrict packets permitted to the Internet.
・You can set up to 50 items in patterns of "packet filtering" on Wi-Fi router.
・ To set this, select "WAN" or "LAN" in "Select the target interface," and then click
Setting items are as follows:
Item
Target interface
Type
Direction
Protocol
Source IP Address
Source Port Number
Destination IP Address
Destination Port Number
Priority
・You should determine how to execute these settings because these settings should be suitable for your operating environment and methods.
Select a target interface (WAN/LAN).
Select how to handle packets that match filter conditions.
Initial setting: Permit
Select a filter judgement direction for the selected interface (WAN/LAN).
Initial setting: in
Select the type of IP protocol to filter. Enter IP protocol number in "Others."
Initial setting: All IPv6
Enter a source IP address whose packets are filtered.
Initial setting: any
Enter a source port number whose packets are filtered.
Enter a destination IP address whose packets are filtered.
Initial setting: any
Enter a destination port number whose packets are filtered.
Enter a priority for filtered entry.
Select .
Description