Table of Contents
Advertisement
30
Precautions When Reading QR Codes
Depending on the version and type of iOS device you are
using, when the encryption mode is "WPA3-SAE (AES)," you
may not be able to connect to Wi-Fi by using the QR code in
camera view of your iOS device.
Connecting Wi-Fi Compatible
Devices
Network Name (SSID) and Password
(Encryption Key: WPA Key)
For network name (SSID) and password (Encryption Key), see
"Network Name (SSID) and Password (Encryption
Default network name (SSID) is in alphanumerics beginning
with "A201NE_".
If they were changed, use changed network name (SSID) and
password (Encryption Key).
The networks on Display other than network name (SSID) set
on Wi-Fi router are WLAN signals received from nearby. Be
careful when connecting.
Wi-Fi Compatible Devices
This section describes connection operations with screenshots
and steps in "Network Name(SSID(Owner))" at "WPA2/WPA3"
security setting for Wi-Fi setting as an example. Some
operations and screenshots vary by security method. For
details, see the user guide of the Wi-Fi compatible devices to be
connected.
Long press
for about 6 seconds (until "Pocket WiFi 5G"
appears)
When powered on, Home Screen appears and the Internet
connection is established. WLAN function and the Internet
connection using WLAN function are enabled.
・ When Wi-Fi router connects to the Internet,
networks connection completed) lights.
Enable WLAN functions of Wi-Fi compatible devices
Search for access points via Wi-Fi compatible devices
Select Wi-Fi router's network name (SSID) from shown access
points
Key)."
(mobile
Advertisement
Table of Contents
