Table of Contents
Advertisement
・NAPT Settings
Item
TCP Timer (seconds)
UDP Timer (seconds)
・UPnP Settings
Item
UPnP Function
・DMZ Host Settings
Item
DMZ Host Function
IP Address of DMZ Host
・VPN Settings
Item
VPN Pass Through Function
・USB Connection
Item
USB Communication
USB Communication Standard
・Cradle Settings
Item
WAN/LAN Switch Setting
Operating Mode
・WAN Settings
Item
PING Response Function
3
・Quality Report Function
Enter the duration (seconds) in the dynamic conversion table for IP address/port number for
when using NAPT function.
Initial setting: 300 (seconds)
Enter the duration (seconds) in the dynamic conversion table for IP address/port number for
when using NAPT function.
Initial setting: 300 (seconds)
Turn ON to use UPnP (Universal Plug and Play) function.
Initial setting: OFF
Turn ON to use DMZ Host Function.
Initial setting: OFF
Enter the IP address of DMZ host.
Turn ON to use VPN Pass Through Function.
Initial setting: ON
Set to ON to use USB communication with Wi-Fi router.
Initial setting: ON
Set USB Communication Standard (USB 3.0 or USB 2.0).
Initial setting: USB 3.0
Select WAN/LAN switch setting when connected to Cradle.
Initial setting: LAN
Select operating mode (Router Mode or AP/Bridge Mode) for when connected to Cradle.
Initial setting: Router Mode
Turn ON to use PING Response Function.
Initial setting: OFF
Description
Description
Description
Description
Description
1
Description
Description
163
2
Advertisement
Table of Contents
