Table of Contents
Advertisement
Note:
•
Up to 4 devices can be paired with the hearing aids
and stored in the hearing aid's memory, however you
can only connect the hearing aids to one device at
a time.
•
In order to change which device you are connected
to, activate Pairing Mode by ightly pressing both Tap
Touch Control Sensors for 5 seconds until "Pairing"
is heard. On your other device, now navigate to the
Bluetooth settings and search for HP Hearing PRO
XXX and connect to it.
•
The Bluetooth range of the hearing aids is
approximately 32 feet (10 meters) when there is no
interference.
40
How to charge your hearing aids
The HP Hearing PRO Hearing Aids last up to 8 hours on
a single charge* and offers up to a total of 24 hours of
on-the-go battery life when used with the Charge Case*.
Note:
The Hearing aid battery life may be
reduced when using steaming media and hearing
processing simultaneously. E.g., Listening to music
while also using World Volume to amplify your
environment.
The hearing aids provide audible notification to the user
when the battery is getting too low.
* tested to internal Situation Awareness Setup protocol
using Bluetooth connected, World On - Setting (0dB, 106),
Focus Off, Wind Reduction Algorithm On.
41
Advertisement
Table of Contents
