Fujitsu ETERNUS AF Series Configuration Manual page 13

This section describes safety precautions.
Make sure to follow the instructions described below to ensure the safe use of the power synchronized unit.
■ If you detect an unusual occurrence during operation
WARNING
■ Instructions for installation
WARNING
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Do Not
• If the power cord and/or power plug is damaged, do not use the power synchro-
nized unit and contact your sales representative or your maintenance engineer.
Never attempt to repair the power synchronized unit by yourself. Not doing so
may cause electric shock or fire.
Unplug
• If the power synchronized unit overheats, gives off smoke or an unusual odor,
makes an unusual sound, or shakes abnormally, immediately disconnect the
power plug from the socket. After the problem has subsided, contact your sales
representative or your maintenance engineer. Never attempt to repair the power
synchronized unit by yourself. Not doing so may cause electric shock or fire.
• If any liquids such as water or foreign objects like metal fragments get into the
power synchronized unit, immediately disconnect the power plug from the socket.
Then, contact your sales representative or your maintenance engineer. Do not
attempt to repair the power synchronized unit by yourself. Doing so may cause
electric shock or fire.
• If the power synchronized unit is dropped or covers are damaged, immediately
disconnect the power plug from the socket. Then, contact your sales representa-
tive or your maintenance engineer. Do not attempt to repair the power synchro-
nized unit by yourself. Doing so may cause electric shock or fire.
Do Not
• Do not place the power synchronized unit in an area with bad ventilation or
where anything that may cause a fire, or flammable gases are generated. Doing
so may cause a fire and damage the power synchronized unit.
13
Copyright 2019 FUJITSU LIMITED
Safety Precautions
P3AM-8012-14ENZ0