Fujitsu ETERNUS AF Series Configuration Manual page 15

Safety Precautions
CAUTION
■ Handling the power synchronized unit
WARNING
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Do
• Place the power synchronized unit in an environment in which the temperature
and humidity satisfy the environmental conditions described in
(page 22).
- For 24-hour operation, ensure that the schedule for air conditioning is able to
maintain the required temperature. Failure to do so may result in damage to
the device.
- During the winter, control the heating system to limit ambient temperature
rises to less than 15C per hour to prevent condensation. Failure to do so could
lead to electric shock and damage the power synchronized unit.
No Disassembly
• Do not attempt to repair, disassemble, or remodel the power synchronized unit by
yourself. Doing so may cause electric shock or fire.
Do Not
• Do not use a voltage other than that indicated. Doing so may cause electric shock
or fire.
• Do not handle the power plug with wet hands. Doing so may cause electric shock.
• Do not wind power cords too tightly at the root of the power cord. Doing so
stresses the cords and may expose or snap the inner wires, which can lead to elec-
tric shock or fire.
• Do not damage or modify the power cord or the power plug. Heating, forced
bending, twisting, pulling, or placing heavy objects on the power cord or the
power plug will damage it, causing electric shock or fire.
• Do not plug all the power cords into a single outlet. Doing so may cause electric
shock or fire.
• Do not use a power cord that does not satisfy the specifications of the power syn-
chronized unit and the AC sensor unit. Doing so may cause electric shock, fire, or
device failure.
• Do not use any products other than the optional products for the power synchro-
nized unit. Doing so may cause electric shock, fire, or device failure.
15
Copyright 2019 FUJITSU LIMITED
"Specifications"
P3AM-8012-14ENZ0