Siemens SIMATIC V2 Operating Instructions Manual page 9

Features of the Ethernet Monitors
The Ethernet Monitors have a DisplayPort V1.1 interface and the following additional features
as compared to the built-in devices:
• Configuration and operation in the Ethernet/LAN network
• Length of the Ethernet/LAN connection as customary with conventional LAN technology
• Automatic establishment of connection to SIMATIC IPC
• Automatic configuration using 1:1 cable connection
• Ethernet Monitor software and monitor diagnostics function
Features of the PRO devices
The PRO devices are connected to a 24 V DC power supply and have the following features in
addition to the extended versions:
• All-round dust-proof and splash-proof with degree of protection IP65 and Enclosure Type
4X/12 (indoor use only)
• Can be mounted directly on the machine
Note
This is not suitable for UL hazardous location.
• Device versions for mounting:
– PRO device for pedestal (extendable, flange bottom)
– PRO device for support arm (not extendable, flange top)
– PRO device for support arm (extendable, round tube)
Adapters and adapter sets that can be ordered separately support mounting systems from
various manufacturers.
– Base adapter, included in the product package of PRO devices for pedestal (extendable,
– With PRO devices for support arm (extendable, round tube):
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
flange bottom) and for support arm (not extendable, flange top).
- Cover for the mechanical interface below, included in the product package
- Flange mount adapter available as accessory
Overview
1.1 Product description
9