Table of Contents
Advertisement
Care and Maintenance
178
Message
Disk Is Full
Disk
Device Failure
Error %s
Cycle Power
Engine Interface Error
Cycle Power
Flash
Device Failure
Flash File
Operation Failed
Front or Right door
Open
Fuser Unit
wearing out
Fuser Unit
Not installed
Fuser Unit
Worn out
Imaging Unit
wearing out
Imaging Unit
No tension
Imaging Unit
Not installed
Imaging Unit
Worn out
Initializing
Insert printed pages in
MP tray, press Continue
Corrective action/additional information
Erase or replace the printer's hard disk.
Execute the Reset Queues menu from the
printer's front panel. See "Reset Queues" on
page
111.
Cycle Power. If printer does not function
normally, call for service.
Unrecoverable error happened. Turn off the
printer.
Cycle Power. If printer does not function
normally, call for service.
Flash DIMM hardware error. Cycle Power. If
printer does not function normally, call for
service.
Hard disk is functioning abnormally. Cycle
Power. If printer does not function normally,
call for service.
Close Front or Right door.
Fuser unit will need to be replaced soon.
Install a Panasonic fuser unit.
Replace the fuser unit.
Imaging unit will need to be replaced soon.
Set the upper lever of the imaging unit to
"Lock".
Install imaging unit.
Replace the imaging unit.
Printer is initializing.
Insert printed pages into multi-purpose (MP)
tray, then press the Continue/Forward
button.
Advertisement
Table of Contents
