Table of Contents
Advertisement
Care and Maintenance
186
6
a) Open the printer's front door.
b) Loosen the two thumbscrews by turning them
counterclockwise.
c) Turn the lower green lever 180° counterclockwise.
a
7
a) Grasping the front green handle, slide the unit out
until it catches.
b) Lift up the green handle on the left and pull the
imaging unit out of the printer.
IMPORTANT:
•
Do not touch the green surface (the right side) or the black belt
(the under side). Finger prints may affect the print quality.
SAFETY CAUTION:
•
The imaging unit weighs approximately 6.5 kg {14.3 lbs.}. Always
use the handles when lifting it.
Black belt
b
c
b
a
b
Green surface
Advertisement
Table of Contents
