Table of Contents
Advertisement
Connecting the Printer to a Network
50
Parallel port
NOTE:
•
Shut off the printer before connecting it to any network device
Ethernet connection should be made to the printer at a time.
To connect a thinnet cable to the printer:
1
With the printer turned off, connect the MAU transceiver
to the AUI connector on the back of the printer. Secure
the connection using the slide latch on the AUI
connector.
2
Connect the thinnet cable to the BNC connector on the
transceiver.
3
Turn on the printer and then the computer.
To connect a thicknet cable to the printer:
1
With the printer turned off, connect the thicknet cable
connector to the AUI connector on the back of the
printer.
2
Turn on the printer and then the computer.
AUI connector
RJ-45 socket
Only one
.
Advertisement
Table of Contents
