Table of Contents
Advertisement
Options
198
5
Put the four stand offs of the hard disk drive into the four
holes, and secure the hard disk drive on the printer
controller board with four screws.
6
Insert the other end of the cable into the connector on
the hard disk drive.
The pins on the hard disk drive's connector are in two groups
(A and B). Be sure to insert the cable into the part A.
7
Stick the label provided to the hard disk drive.
8
Replace the printer controller board in the printer.
For instructions, see "Removing and replacing the printer controller
board" on
page
193.
B
A
Advertisement
Table of Contents
