Removing The Shift Motor - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Feed Assembly > Removing the Shift Motor > Procedure
3) Remove the belt [1], and remove the Side Registration Shift Motor [2].
• 2 Screws [3]
[1]
4 Parts Replacing and Cleaning > Feed Assembly > Removing the Shift Motor > Procedure
[3]
[2]
F-4-118

Removing the Shift Motor

■ Preparation
1) Open the Front Cover.
2) Separate the finisher from the host machine.(Refer to page 4-18)
3) Remove the Rear Upper Cover (Right).(Refer to page 4-21)
4) Remove the Rear Upper Cover (Left).(Refer to page 4-21)
5) Remove the Rear Cover.(Refer to page 4-20)
6) Remove the Inner Cover (Upper).(Refer to page 4-22)
7) Remove the Side Registration Shift Unit.(Refer to page 4-49)
■ Procedure
1) Remove the Shift Motor [1].
• 2 Screws [2]
• 1 Belt [3]
x2
[2]
[1]
[3]
F-4-119
4-54
4-54