Saddle Stitcher Unit; Overview - Canon Finisher-AK1 Service Manual

2
Technology > Saddle Stitcher Unit > Overview

Saddle Stitcher Unit

Overview

The saddle stitcher block serves to staple a stack of sheets according to the instructions from
the saddle stitcher controller PCB, and moves the stack to the saddle delivery belt.
The paper path is fitted with 8 sensors to check for a jam.
Saddle Stitcher Controller PCB
[1] [2] [3] [4] [5] [6]
SL104 SL103
M108 M104 M112 M109 M107
2 Technology > Saddle Stitcher Unit > Overview
[7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]
SL105
M110 M102 M113 M101 M111 M110 M106 M103 M105
[1] Saddle alignment roller drive signal
[2] Delivery belt motor drive signal
[3] Saddle guide motor drive signal
[4] Saddle pressing motor drive signal
[5] Paper folding/transport motor drive
signal
[6] Stitcher motor drive signal
[7] Saddle tapping motor drive signal
[8] Saddle pull-in shift motor drive signal
[9] Saddle transport motor drive signal
[10] Saddle paper butting plate signal
M101 : Saddle transport motor
M102 : Saddle alignment guide motor
M103 : Saddle lead edge stopper motor
M104 : Saddle guide motor
M105 : Saddle paper push-on plate motor
M106 : Saddle folder/feeder motor
M107 : Saddle delivery belt motor
M108 : Saddle press motor
M109 : Stitcher motor
F-2-45
[11] Saddle alignment motor drive signal
[12] Saddle lead edge stopper motor drive signal
[13] Saddle trailing edge stay motor drive signal
[14] Saddle trailing edge shift motor drive signal
[15] Alignment roller disengage solenoid (upper)
drive signal
[16] Alignment roller disengage solenoid (lower)
drive signal
[17] Leading edge gripper solenoid drive signal
M110 : Saddle trailing edge holding motor
M111 : Saddle trailing edge moving motor
M112 : Saddle alignment roller motor
M113 : Saddle tapping motor
M114 : Saddle lead-in roller disengage motor
SL103 : Alignment roller disengage solenoid (upper)
SL104 : Alignment roller disengage solenoid (lower)
SL105 : Lead edge gripper solenoid
2-28
2-28