Siemens SIREMOBIL Compact Installation And Setting Instructions Manual page 2

2
Document revision level
The document corresponds to the version/revision level effective at the time of system
delivery. Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise
authorized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated
with or authorized by Siemens or one of its affiliates are directed to contact one of the
local offices of Siemens or one of its affiliates before attempting installation or service pro-
cedures.
General
Safety note
WARNING
Additional note
These instructions apply to retrofitting the area dose measurement device to a
SIREMOBIL Compact only.
Parts required
•
Area dose measurement device
retrofit kit with PC board D16 and dose
measurement chamber
and materials for securing it
SIREMOBIL Compact
Installation and Setting Instructions
Avoiding minor to severe physical injuries - which can lead to
death and avoiding material damage.
The product-specific safety notes stated in the system folder and
the safety notes stated in ARTD Part 2 must be complied with.
After conclusion of all work and after attachment of all covers
perform the protective ground wire test according to
ARTD-002.731.17. The protective ground wire resistance must not
exceed 0.2 Ohm.
Checks or settings which must be performed with X-ray radiation
switched on are marked by the radiation symbol
Radiation protection clothing must be worn when performing
operations thus marked.
Register 3 RXR2-130.033.01
Rev. 04
97 97 101 G 5321
Page 2 of 10
04.02 CS PS 24
1
1
1
1
1
.
1
1
Siemens AG
Medical Engineering