General - Husqvarna DXR140 Operator's Manual

General

CAUTION! Please read the operator's
!
manual carefully and make sure you
understand the instructions before using
the machine. You should also read and
understand the manual that
accompanies the tool.
Ensure that the tool's and the machine's
performance (weight, hydraulic pressure,
flow etc) are compatible.
The machine may only be used with the following tools or
accessories marketed by Husqvarna.
Bucket
A bucket is intended for moving material and not as a
lifting tool.
Bucket, standard 55 L
The toothed bucket is for digging e.g. earth with grass and
roots.
Narrow bucket 40 L
The bucket's design is suitable for work such as the laying
of pipe.
Wide bucket 60 L
The wide bucket is suitable for shoveling large masses of
material such as when clearing rubble after demolition.
28 – English
TOOLS
Hydraulic hammer SB 152
The hydraulic hammer is designed for demolition by
means of hewing. It is not designed for use as a crowbar.
Continuous hewing with the hydraulic hammer can result
in high temperatures in the hydraulic system.
Concrete cutter DCR100
The concrete cutters are designed to crush and cut
material in their jaws. They are not designed for pulling
and prizing loose material.
Steel Shear DSS200
The steel shears are intended to cut metallic materials
with their jaws. They are not designed for pulling and
prizing loose material.
Grapple
The grippers are intended for demolishing wooden
structures and brick walls, sorting and loading work. It is
not intended to pull/demolish beams, stays and walls.
Neither is it intended to hammer/hack or transport loads.
External tool
External hydraulic tools can be connected to the machine.
External tool is activated from the service menu. See
instructions in the section "Settings".