Husqvarna DXR140 Operator's Manual page 35

HOUR METER
SERVICE
The operating hours for the machine (the time when the motor is on) are saved in the control modules and can be read
in the terminal.
When the remote control (terminal) is connected to the machine, can the operating hours be read in online mode.
When the remote control (terminal) is disconnected to the machine the operating hours can be read in offline mode.
Measurement refers to the operating hours when the current control is connected to the machine. If the machine has
been operated with another control, the information concerning operating hours will not be correct.
WARNINGS
SERVICE
The machine has 2 warning logs and a list of active warnings.
• Warning log machine: Records all warnings that have been present in the machine. All active warnings and service
messages are listed after they have been confirmed.
• Warning log terminal (remote control): Records all warnings that have been present in the remote control (terminal).
All active warnings and service messages are listed after they have been confirmed.
• Active warning: Shows all active warnings. They will remain in the list for as long as they are active.
All warnings are sorted according to the hour meter registers when they occured. The newest warning is showed first
and the oldest is last.
Warning: 13
Hours: 00006
Minutes: 02
Previous
Back
Back
1 Warning code: Identifies the kind of warning that has been registered.
2 The number of times the warning has been present in the system.
3 Registered working time when the warning last occured.
4 Previous warning in the warning log.
5 Exit the warning log.
6 Next warning in the warning log.
7 More information about the warning.
LCD ADJUSTMENT
SERVICE
Use the arrows up and down to adjust the display's contrast and brightness.
Selecting Power save mode OFF, the display will be on constantly.
SETTINGS
HOUR METER
Warning log machine
WARNINGS
Warning log terminal
Back
#4
Next
Info
LCD ADJUSTMENT
Active warnings
English – 35