Service - Husqvarna DXR140 Operator's Manual

Steel Shear
WORK
Select this when you want to work with a steel shear. Press the selection key to confirm the choice.
Extra1 will be activated automatically for the rotor function when steel shears are selected.
Grapple
WORK
Select this when you want to work with a grapple. Press the selection key to confirm the choice.
Extra1 will be activated automatically for the rotor function when grippers are selected.
ADJUSTABLE 1-3
WORK
Select this when you want to work with a tool that is not a standard tool.
The value for oil pressure and oil flow can be adjusted from port A to B. Select which setting you would like to change
with the selection keys. Use the arrow keys to change the value.
The oil direction can either be one-way – with or without grease (e.g. when working with a breaker) or two-way – with or
without grease (e.g. when working with a crusher). Press the selection key to switch to another mode.

Service

WORKING LIGHT
SERVICE
Activates/shuts off the work lighting. Press the selection key to switch to another mode.
TRACK TENSION
SERVICE
Hold the selection key down to activate the track tension.
SETTINGS
STEEL SHEAR
STEEL SHEAR
(OTHERS)
STEEL SHEAR
GRAPPLE
(OTHERS)
STEEL SHEAR
(OTHERS)
ADJUSTABLE 3
ON/OFF
WORKING LIGHT
TRACK TENSION
Activate
ON/OFF
Hold down
to activate
Back
Adjustable Tool 3
Oil press. A-B: 150bar
(30...250bar)
Adjustable Tool 3
Oil press. B-A: 150bar
(30...250bar)
TRACK TENSION
Adjustable Tool 3
Oil flow A-B: 65l/min
(5...50l/min)
Adjustable Tool 3
Oil flow B-A: 65l/min
(5...50l/min)
Adjustable Tool 3
1(3)
Oil direction B->A
No grease
English – 33