Selecting A Blade; Using The Infocenter Control - Toro 30608 30644 Operator's Manual

Selecting a Blade

Grass conditions
Leaf mulching
Pros
Cons
Using the InfoCenter
Control
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics and other information about the machine
(Figure 32). There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen at any time by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
Figure 32
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to exit any menu that you are currently using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Atomic Blade Flat-Sail Blade
Wet, sticky, and spring
Light or sparse turf
growth
Works well Do not use
Less lift, breaks up Does not create lots of
clumped clippings air flow in dusty, sandy,
and sparse grass
Less lift and less Not recommended
dispersion in heavy for normal to heavy
conditions conditions
3. Middle button
4. Left button
Standard-Sail Blade
Normal cutting
Works well
Good performance
overall
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
g020650
32
Medium-Sail Blade
All conditions to heavy
growth
Works well
More lift and less
turbulence than standard
blade, overall good