Figure 47
2.
Press the right button to change the inhibit
regeneration setting from On to Off
or from Off to On
Figure 48
Allowing a Reset Regeneration
The InfoCenter displays the high exhaust-temperature
icon
when the reset regeneration is in process.
Note:
If I
R
NHIBIT
EGEN
displays A
#185
DVISORY
to set inhibit regeneration setting to O
with the reset regeneration.
(Figure
(Figure
48).
is set to O
, the InfoCenter
N
(Figure
49). Press button 3
and continue
FF
g227304
Note:
If the InfoCenter displays A
47)
(Figure
50), set the engine to full throttle (high idle) to
allow the reset regeneration to continue.
g224691
Note:
When the reset regeneration completes, the
high exhaust-temperature
InfoCenter screen.
48
Figure 49
#186
DVISORY
Figure 50
disappears from the
g224394
g224395