Husqvarna 2-20DT Global Operator's Manual page 15

blast housing. Brush lists (B) are attached around the
magnetic seals.
The skid seal (C) moves on the surface.
To set correct height of the magnetic
seals
The correct height adjustment of the magnetic seals is
8-10 mm/0.3-0.4 in. from the surface.
1. Turn the 2 adjustment screws at the front to set the
correct height.
2037 - 001 - 07.02.2023
A
B
C
2. Turn the 2 adjustment screws at the rear to set the
correct height.
To set correct height of the brush list
seals
The correct height adjustment of the brush lists is 1 mm/
0.04 in from the surface.
1. Loosen the screws that holds the brush list.
15