Transportation, Storage And Disposal - Husqvarna 2-20DT Global Operator's Manual

Shot blasting machine
Hide thumbs Also See for 2-20DT Global:
Table of Contents

Advertisement

Available languages

Available languages

Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
Make sure that the power supply is disconnected
before transportation.
Make sure that the electrical cable and dust extractor
hose are disconnected before transportation.
Remove the abrasive before transportation.
The wheels let you move the product shorter
distances. For longer distances, lift the product to
move it or put the product on a vehicle.
Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
Engage the drive system during transportation. Refer
To engage and disengage the drive system on
to
page 12 .
To set the product in transport position
WARNING:
the blastwheels have fully stopped.
1. Attach the lever to the lift mechanism (A).
 
A
 
28

Transportation, storage and disposal

Be careful during
Do not tow the product
Do not lift the product until
B
C
2. Lift (B) the lever to transportation position (C).
To move the product manually
WARNING:
are stationary before you move the product.
WARNING:
steel toe-cap and non-slip sole.
WARNING:
up and down ramps manually with the drive
system disengaged. Only move the product
manually on level ground.
1. Disengage the drive system. Refer to
disengage the drive system on page 12 .
2. Push the handle downwards.
3. Push or pull the product by the handle.
4. Engage the drive system. Refer to
disengage the drive system on page 12 . With the
motor off, this has the function of a parking brake
and prevents accidental movement of the product.
To move the product with the drive
system
WARNING:
there is a risk of injury if the product falls. Be
careful when you move around the product.
WARNING:
the ground during operation.
WARNING:
forward during operation.
WARNING:
steel toe-cap and non-slip sole.
1. Engage the drive system. Refer to
disengage the drive system on page 12 .
Wait until all moving parts
Use protective boots with
Do not move the product
To engage and
To engage and
The product is heavy and
Do not lift the product of
Do not move the product
Use protective boots with
To engage and
2037 - 001 - 07.02.2023

Advertisement

Table of Contents
loading

This manual is also suitable for:

2-30ds global

Table of Contents