Siemens RUGGEDCOM RX1501 Installation Manual page 23

RUGGEDCOM RX1501
Installation Guide
Figure 7: AC Terminal Block Wiring – Screw Terminal Block for HI Power Supplies
1. Not Connected 2. Removable Screw Terminal Block 3. Non-removable Screw Terminal Block 4. Positive/Live (+/L) Terminal
5. Ground Terminal 6. Negative/Neutral (-/N) Terminal
2. Connect the positive wire from the power source to the positive/live (+/L) terminal on the terminal block.
3. Connect the negative wire from the power source to the neutral/negative (-/N) terminal on the terminal block.
4. For screw terminal blocks, install the safety cover.
Connecting High AC/DC Power
4 1 5 1 6
2
Installing the Device
4 5 6
3
Chapter 2
13