Siemens RUGGEDCOM RX1501 Installation Manual page 34

Chapter 3
Device Management
Figure 18: Inserting the CF Card
1. CompactFlash Card 2. Access Panel
4. Secure the CF card access panel to the chassis.
Removing the CF card
To remove the CF card from the device, do the following:
1. Make sure the device is powered down.
2. Remove the CF card access panel.
Figure 19: Removing the CF Card
1. Ejector Button 2. CompactFlash Card 3. Access Panel
3. Press the ejector button to the left of the CF card and then pull the card out.
4. Secure the CF card access panel to the chassis.
24
1
2
2
3
1
RUGGEDCOM RX1501
Installation Guide
Accessing the CompactFlash Card