Table of Contents
Advertisement
• If your computer comes with a VESA mount bracket, and you are installing the smaller vertical stand,
ensure that you remove the VESA mount bracket before you install the vertical stand. To remove the VESA
mount bracket, see "Replacing the VESA mount bracket" on page 95.
To replace the vertical stand, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Lift the computer to remove it from the vertical stand.
Figure 14. Removing the computer from the vertical stand
94
ThinkCentre M600 Hardware Maintenance Manual
Advertisement
Table of Contents
