Replacing The Power Adapter Bracket - Lenovo 10KG Hardware Maintenance Manual

7. Install the screw to secure the external battery box on the VESA mount bracket.
Figure 35. Installing the external battery box screw
8. Connect the external battery box cable to a USB connector on the computer. See "Rear view" on
page 29.

Replacing the power adapter bracket

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Note: The power adapter bracket is installed on the Video Electronics Standards Association (VESA) mount
bracket.
To replace the power adapter bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
110
ThinkCentre M600 Hardware Maintenance Manual