Steps
1. Align the tabs on the side cover with the slots and replace the side cover on the chassis.
2. Slide the side cover towards the front of the unit and tighten the two cap screws to secure the side cover to the chassis.
Next steps
1. Follow the procedure in
Bezel
Removing the front bezel
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Place the computer in an upright position.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure:
Steps
1. Gently pry and release the front bezel tabs sequentially from the top.
2. Rotate the front cover outward from the chassis.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
19